Anhydrous proton-conducting organic-inorganic hybrid membranes synthesized from tetramethoxysilane/methyltrimethoxysilane/diisopropyl phosphite and ionic liquid

Abstract

Inorganic-organic hybrid membranes were prepared by sol-gel process with tetramethoxysilane/methyltrimethoxysilane/diisopropyl phosphite and 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4) ionic liquid as precursors. The Fourier transform infrared spectroscopy (FT-IR) and 31P, 29Si, 1H, 13C, and 19F nuclear magnetic resonance measurements have shown good chemical stability and complexation of (POH[(CH3)2CHO]2) with [BMIMBF4] ionic liquid in the fabricated hybrid membranes. The influence of the textural properties of all the prepared composite membranes could be interpreted from nitrogen adsorption-desorption measurements. The average pore size was increased proportionally with the ionic liquid weight percent ratio in the host phosphosilicate matrix from 2.59 to 11.71 nm, respectively. Thermogravimetric analysis and differential thermal analysis measurements confirmed that the hybrid membranes were thermally stable up to 260 °C. Thermal stability of the hybrid membranes was significantly enhanced by the presence of inorganic SiO2 framework and high stability of [BF4] anion. For all the composite membranes, the conductivities were measured within the temperature range (-30 °C) to 150 °C, and a maximum conductivity of 7 × 10-3 S/cm at 150 °C was achieved for 40 wt.% ionic liquid-based composite membrane under nonhumidified conditions. © 2010 Springer-Verlag.