Title: EDM process parameters optimization for Al-TiO2 nano composite
| dc.contributor.author | Arvind Kumar Dixit | |
| dc.contributor.author | Richa Awasthi | |
| dc.date.accessioned | 2026-02-07T08:32:16Z | |
| dc.date.issued | 2017 | |
| dc.description.abstract | Titanium aluminide reinforced aluminium based metal matrix nano composite was prepared by stir casting route. Experiments were conducted with Cu electrode using L9 orthogonal array based on the Taguchi method. Discharge current (Lv), Pulse on time (Ton) and Flushing pressure (FP) are selected to calculate Metal removal rate (MRR), Tool wear rate (TWR) and Surface roughness (SR) based on Taguchi's parameter design. Moreover, the signal-to-noise ratios associated with the observed values in the experiments were determined using MINITAB software for MRR, TWR and SR. PCR - TOPSIS method is used to optimize Taguchi's multi response. Optimum parameter setting is found at Discharge current (Lv) 10 A, Pulse on time (Ton) 150 μs and Flushing pressure (FP) 1 kg/cm2. © 2017, IGI Global. All rights reserved. | |
| dc.identifier.doi | 10.4018/978-1-5225-1798-6.ch056 | |
| dc.identifier.isbn | 978-152251799-3; 978-152251798-6 | |
| dc.identifier.uri | https://doi.org/10.4018/978-1-5225-1798-6.ch056 | |
| dc.identifier.uri | https://dl.bhu.ac.in/bhuir/handle/123456789/31082 | |
| dc.publisher | IGI Global | |
| dc.title | EDM process parameters optimization for Al-TiO2 nano composite | |
| dc.type | Publication | |
| dspace.entity.type | Book chapter |