Efficient Moisture-Induced Energy Harvesting from Water-Soluble Conjugated Block Copolymer-Functionalized Reduced Graphene Oxide

Abstract

This Research Article demonstrates a very simple approach of a moisture-induced power-generating phenomenon using water-soluble rod-coil conjugated block copolymer (poly(3-hexythiophene)-block-poly(4-styrenesulfonic acid) (P3HT-b-PSSA)-modified reduced graphene oxide. The block copolymer-modified reduced graphene oxide (BCP-RGO) was prepared by noncovalent surface functionalization cum in situ reduction of graphene oxide. A simple device made from BCP-RGO can generate voltage upon exposure to water vapor or under different humidity conditions. The open-circuit voltage generated from the diode-like device varies with respect to the relative humidity, and the device can act as a self-powered humidity sensor. The as-prepared BCP-RGO is able to produce a maximum power density of 1.15 μW/cm2 (short-circuit current density JSC = 6.40 μA/cm2) at a relative humidity of 94%. Meanwhile, the BCP-RGO device produces a very high power density of 0.7 mW/cm2 (at a short-circuit current density of 1.06 mA/cm2) after 91% water absorption. We believe that the material presented here will be very useful for a self-biased humidity sensor and moisture-induced energy harvesting. The diode-like response of the BCP-RGO device with humidity or after water absorption will make the material applicable for self-biased humidity-controlled electronic switching. © 2021 The Authors. Published by American Chemical Society.